• Publication List_200808


  •   
  • FileName: Publication List_200808.pdf [preview-online]
    • Abstract: (39) Tsai, H. H. and Hocheng, H., 2001, "Monitoring Strategy of Thermal-induced ... Vol A318, pp.155-162. (49) Hocheng, H., Tsai, H.Y. and Su, Y.T., 2001, "Modeling and ...

Download the ebook

Publication List 2008/08/01
(A) JOURNAL PAPER
(1) Hocheng, H. and Dharan,C.K.H., 1990, "Delamination During Drilling in Composite
Laminates", ASME Trans. J. Engineering for Industry, Vol.112, pp.236-239.
(2) Hocheng, H. 1990, "A Failure Analysis of Water Jet Drilling in Composite Laminates",
International Journal of Machine Tools & Manufacture, Vol.30, pp.423-429.
(3) Hocheng, H. and Jia, C.L., 1991, "Reliability Monitoring in Drilling Electronic Circuit
Boards", ASME Trans. J. Electronic Packaging, Vol.113, pp.263-267.
(4) Hocheng, H. and Puw, H.Y.,1992, "On Drilling Characteristics of Fiber-Reinforced
Thermoset and Thermoplastics", International Journal of Machine Tools & Manufacture,
Vol.32, pp.583-592.
(5) Hocheng, H. and Leu, S. C., 1992, "Machining Characteristics of Carbon Fiber-Reinforced
Epoxy Tube in Turning", Composites, Vol.32, No 3, pp.136-140.
(6) Hocheng, H., Puw, H. Y. and Huang, Y., 1993, "Preliminary Study of Milling of
Unidirectionally Fiber-Reinforced Plastics", Journal of Composites Manufacturing
(predecessor of Composites, Part A), Vol.4, pp.103-108.
(7) Hocheng, H. and Puw, H.Y., 1993, "Machinability Test of Carbon Fiber-Reinforced Epoxy
in Milling", Materials and Manufacturing Processes, Vol.8, pp.717-730.
(8) Hocheng, H.and Puw, H.Y., 1993, "Machinability of Fiber-Reinforced Thermoplastics in
Drilling", ASME Trans. J. of Engineering Materials and Technology, Vol.115, pp.146
-149.
(9) Hocheng, H. and Chang, K.R., 1994, "Material Removal Analysis in Abrasive Water Jet
Cutting of Ceramic Plates", Journal of Materials Processing Technology, Vol.43, No.40,
pp.287-304.
(10) Hocheng, H., Puw, H.Y.and Yao, K. C.,1994, "Machinability of Some Fiber-Reinforced
Thermoset and Thermoplastics in Drilling", Materials and Manufacturing Processes,
Vol.6, pp.653-682.
(11) Hocheng, H., 1995, "Critical Matrix Yielding Stress and Interfacial Fracture in Forming of
Metal Matrix Composite Wires", JSME International Journal, Vol.38, No.4, pp.625-630.
(12) Hocheng, H. and Hsu,.C.C. 1995, "Preliminary Study of Ultrasonics Drilling of Fiber-
Reinforced Plastics", Journal of Materials Processing Technology, Vol.48, pp.255-266.
(13) Hocheng, H. and Pan,C.T., 1996, "The Anisotropic Heat Affected Zone in Laser Grooving
of Fiber-Reinforced Composite Material", Journal of Materials Processing Technology,
Vol. 62/1-3, pp.54-60.
(14) Hocheng, H. and Chen, H.C., 1996, "Mechanical Design of Major Components of the
Single Pole Carriage in ", Tsing Hua Journal of Chinese Studies,
Vol.25, No.1, pp.419-450.
(15) Tsai, H. H. and Hocheng, H., 1996, "Numerical Investigation of Transient Thermal
1
Stresses of Workpiece in Surface Grinding", Journal of Thermal Stresses, Vol.19, No 6,
pp.565-578.
(16) Hocheng, H., Lei, W.T. and Hsu, H.H., 1997, "Preliminary Study of Material Removal in
Electrical-Discharge Machining of SiC/Al", Journal of Materials Processing Technology,
Vol. 63, pp.813-818.
(17) Hocheng, H., Tsai, H. Y., Shiue, C.C. and Wang, B., 1997, "Feasibility Study of
Abrasive-Water Jet Milling of Fiber-Reinforced Plastics", ASME Trans. J. Engineering
for Industry, Vol.119, pp.133-142.
(18) Tsai, H. H. and Hocheng, H., 1997, "Monitoring of Creep-in Depth Beyond the Initial
Wheel/Workpiece Contact in Surface Grinding by Acoustic Emission", Journal of
Machining Science and Technology, Vol 1,No 1, pp.15-32.
(19) Hocheng, H., Guu, Y.H. and Tai, N.H. 1998, "The Feasibility Analysis of Electrical
Discharge Machining of Carbon-Carbon Composite Materials", Materials and
Manufacturing Processes, Vol.13, pp.117-132.
(20) Hocheng, H., Yen, S.B., Ishihara, T. and Yen, B.K., 1998, "Fundamental Turning
Characteristics of A Tribology-Favored Graphite/Aluminum Alloy Composite Material",
Composites, Part A, Vol.28, pp.883-890.
(21) Pan, C.T. and Hocheng, H., 1998, "Prediction of Extent of Heat Affected Zone in Laser
Grooving of Unidirectionally Fiber-Reinforced Plastics", ASME Trans. J. of Engineering
Materials and Technology, Vol.120, pp.321-327.
(22) Tsai, H. H. and Hocheng, H., 1998, "Investigation of Transient Thermal Deflection and
Stresses of Workpiece in Surface Grinding with Application of Cryogenic Magnetic
Chuck", Journal of Material Processing Technology, Vol.79, pp.177-184.
(23) Tsai, H. H. and Hocheng, H., 1998, "Analysis of Transient Thermal Bending Moments and
Stresses of the Workpiece During Surface Grinding", Journal of Thermal Stresses, Vol.21,
No 6, pp.691-711.
(24) Hocheng, H. and Pan, C.T., 1998, "Prediction of Laser-Induced Thermal Damage of Fiber
Mat and Fiber MatUD-Reinforced Polymers", ASM Trans. J. of Materials Engineering
and Performance, Vol.7, No.6, pp.751-756.
(25) Puw, H.Y and Hocheng, H.., 1998, "Chip Formation Model of Cutting Fiber-Reinforced
Plastics Perpendicular to Fiber Axis", ASME Trans. J. of Manufacturing Science and
Engineering, Vol 120, No 1, pp.192-196.
(26) Puw, H.Y. and Hocheng, H., 1999, "Milling of Polymer Composites", a chapter in
Machining of Ceramics and Composites, Ed. S. Jahanmir and M. Ramulu, Marcel
Dekker Book, pp.267-294.
(27) Hocheng, H. and Pa, P.S., 1999, "Electrobrightening and Electropolishing of Holes Using
Feeding Electrodes", Journal of Material Processing Technology, Vol. 89/90,
pp.434-446.
(28) Uhlmann, E., Spur, G., Hocheng, H., Liebelt, S. and Pan, C.T., 1999, "The Extent of
2
Laser-Induced Thermal Damage of Fiber UD and Cross-ply Composite Laminates",
International Journal of Machine Tools & Manufacture, Vol.39, No.4, pp.639-650.
(29) Hocheng, H., Kuo, C. L. and Wei, S.W., 1999, "Electropolishing of a Spherical Surface
and the Application of Fuzzy Inference", International Journal Electrical Machining,
Vol.4, pp.19-28.
(30) Hocheng, H. and Pan, C.T., 1999, "The Effects of Cryogenic Surroundings on Thermal
Induced Damage in Laser Grooving of Fiber-Reinforced Plastics", Journal of Machining
Science and Technology, Vol.3, pp.77-90.
(31) Hocheng, H., Kuo, K.L. and Lin, C.T., 1999, "Machinability of Ultrasonic Drilling of
Zerconia", Materials and Manufacturing Processes, Vol.14, No.5, pp.713-724.
(32) Hocheng, H., Huang, Y. L. and Chen, L.J., 1999, "Kinematic Analysis and Measurement
of Temperature Rise on Pad in CMP", Journal of the Electrochemical Society, Vol.146,
No.11, pp.4236-4239.
(33) Hocheng, H. and Tsai, H.Y., 1999, "A Material Removal Model in Chemical Mechanical
Planarization of Silicon Dioxide Film and Bare Silicon Wafer", International Journal of
Chemical Mechanical Planarization, Vol.1, No.1, pp.90-101.
(34) Hocheng, H., Tsai, H.Y. and Tsai, M.S., 2000, "A Kinematic Analysis of Nonuniformity
in Chemical Mechanical Planarization", International Journal of Machine Tools &
Manufacture, Vol.40, pp.1651-1669.
(35) Hocheng, H., Tai, N.H. and Liu, C.H., 2000, "Assessment of Ultrasonic Drilling of C/SiC
Composite Material", Composites, Part A, Vol.31, No.2, pp.133-142.
(36) Hocheng, H. and Pa, P.S., 2000, "Ring-Form Electrode in Electropolishing of External
Cylindrical Surface", International Journal of Electrical Machining, Vol.5, pp.7-15.
(37) Hocheng, H. and Hsu, M.Y., 2000,"Erosion Wear of Stainless Steel by Abrasives
Entrained in a Water Jet", Arabian Journal for Science and Engineering, Vol.25, No.1B,
pp. 189-202.
(38) Guu, Y.H., Hocheng, H., Tai, N.H. and Liu, S.Y., 2001, "Effects of Electrical Discharge
Machining on Characteristics of Carbon-Fiber Reinforced Carbon Composites", Journal
of Materials Science, Vol 36, pp.2037-2043.
(39) Tsai, H. H. and Hocheng, H., 2001, "Monitoring Strategy of Thermal-induced
Convex Deformation of Workpiece in Surface Grinding", International Journal of
Advanced Manufacturing Technology, Vol 17, No 10, pp.710-714.
(40) Guu, Y.H. and Hocheng, H., 2001,"Effects of Workpiece Rotation on Machinability during
Electrical Discharge Machining", Materials and Manufacturing Processes, Vol.16, No.1,
pp.91-101.
(41) Hocheng, H. and Pa, P.S., 2001, "Electrode Form Design and Ultrasonic Aid in
Electropolishing of Holes", International Journal of Electrical Machining, pp.33-39.
(42) Pan, C.T. and Hocheng, H., 2001, "Evaluation of Anistropic Thermal Conductivity for
Unidirectional Fiber-Reinforced Plastics in Laser Machining of Unidirectionally Fiber-
3
Reinforced Plastics", Composites, Part A, Vol.32, No.11, pp.1657-1667.
(43) Hocheng, H. and Guu, Y.H., 2001,"High-Cycle Fatigue of Electrical-Discharge Machined
AISI D-2 Steel", International Journal of Materials and Product Technology, Vol 16,
No 6/7, pp.642-657.
(44) Hocheng, H., Gao, P.S. and Chen, Y.F., 2001, "Electropolishing of of 316L Stainless Steel
for Anticorrosion Passivation ", ASM Trans. J. of Materials Engineering and
Performance, Vol 10, No 4, pp.414-418.
(45) Jeng, F.S., Huang, T.H., Lu, Y.C. and Hocheng, H., 2001,"Threshold Condition for
Penetrating Rocks Using High Pressure Waterjet", Journal of Civil and Hydraulic
Engineering, Vol 13, No 3, pp.677-681.
(46) Chang, Y. and Hocheng, H., 2001, "Flowability of Bentonite Bonded Green Molding
Sand", Journal of Materials Processing Technology, Vol 113, pp. 238-244.
(47) Hocheng, H., Tsai, H.Y. and Huang, Y.L., 2001, "Essential Aspects in Chemical
Mechanical Planarization of Dioxide Semiconductor", Key Engineering Materials,
pp.1-24, Trans Tech, Switzerland.
(48) Guu, Y.H. and Hocheng, H., 2001,"Improvement of Fatigue Life of Electrical Discharge
Machined AISI D2 Tool Steel by TiN Coating", Journal of Material Science and
Engineering, Vol A318, pp.155-162.
(49) Hocheng, H., Tsai, H.Y. and Su, Y.T., 2001, "Modeling and Experimental Analysis of
Material Removal Rate in Chemical Mechanical Planarization of Silicon Dielectric Films
and Bare Silicon Wafer", Journal of the Electrochemical Society, Vol.148, No.10,
pp.G581-586.
(50) Tsao, C.C. and Hocheng, H., 2001, “Comparison of the Tool Life of Tungsten Carbides
Coated by Multilayer TiCN and TiAlCN for End Mills Using the Taguchi Method”,
Journal of Materials Processing Technology, Vol.123, pp. 1-4.
(51) Wang, C.C., Lin, S.C. and Hocheng, H., 2002, “A Material Removal Model for Polishing
Glass-Ceramic and Aluminum Magnesium Storage Disk”, International Journal of
Machine Tools and Manufacture, Vol.42, pp.979-984.
(52) Hocheng, H. and Cheng, C.Y., 2002, "Visualized Characterization of Fluid Film Between
Wafer and Pad during Chemical Mechanical Planarization", IEEE Trans. Semiconductor
Manufacturing, Vol.15, No.1, pp.45-50.
(53) Hocheng, H. and Pa, P.S., 2002, "Application of Turning Tool as Electrode in
Electropolishing, Journal of Materials Processing Technology, Vol.120, pp.6-12.
(54) Tsai, H. H. and Hocheng, H., 2002, "On-Line Identification for Thermal-induced
Convex Deformation of Workpiece in Surface Grinding", Journal of Materials
Processing Technology, Vol.121, No.2-3, pp.189-201.
(55) Tsai, H. H. and Hocheng, H., 2002, "Prediction of Thermal-induced Concave Surface of
Workpiece in Surface Grinding", Journal of Materials Processing Technology, Vol.122,
Nos.2-3, pp.148-159.
(56) Hocheng, H. and Kuo, K.L., 2002, "On-Line Tool Wear Monitoring during Ultrasonic
4
Machining Using Tool Resonance Frequency", Journal Materials Processing Technology,
Vol 123, No.1, pp. 80-84.
(57) Hocheng, H. and Kuo, K.L., 2002, "Fundamental Study of Ultrasonic Polishing of Mold
Steel", International Journal of Machine Tools and Manufacture, Vol 42/1, pp.7-13.
(58) Tsao, C.C. and Hocheng, H., 2002, “Comparison of Tool Life of Tungsten Carbides
Coated by Multi-layer TiCN and TiAlCN for End Mills using Taguchi Method”, Journal
of Materials Processing Technology, Vol.123, No.1, pp.1-4.
(59) Hocheng, H. and Weng, C.H., 2002, "Hydraulic Erosion of Concrete by a Submerged Jet",
ASM Trans. J. of Materials Engineering and Performance, Vol 11, No 3, pp.256-261.
(60) Hocheng, H. and Pa, P.S. 2003, "Effective Form Design of Electrode in Electrochemical
Smoothing of Holes", International Journal of Advanced Manufacturing Technology,
Vol.21, No.12, pp. 995-1004.
(61) Hocheng, H., Y.H. Sun, S.C. Lin and P.S. Gao, 2003, "A Material Removal Analysis of
Electrochemical Machining Using Flat-End Electrode", Journal of Materials Processing
Technology, Vol. 140, pp. 264-268.
(62) Hocheng, H. and Pa, P.S., 2003, "Continuous Secondary Ultrasonic Electropolishing of
SKD61 Cylindrical Part", International Journal of Advanced Manufacturing Technology,
Vol.21, No.4, pp.238-242
(63) Hocheng, H. and Pa, P.S., 2003, "Electropolishing of Cylindrical Workpiece of Tool
Materials Using Disc-Form Electrodes", Journal Materials Processing Technology,
Vol.142, No.1, pp.203-212.
(64) Hocheng H. and Huang, Y.L. 2003, “A Comprehensive Review of Endpoint Detection in
Chemical Mechanical Planarization for Deep-Submicron Integrated Circuits
Manufacturing”, International Journal of Materials and Product Technology, Vol 18
No. 4/5, pp.469-486.
(65) Hocheng, H. and Gao, P.S., 2003, "Optimization of Electropolishing of Stainess Steel by
Gray Relational Analysis", Journal of Materials Processing Technology, Vol. 140, pp.
255-259.
(66) Hocheng, H. and Tsao, C.C., 2003, "Comprehensive Analysis of Delamination in Drilling
of Composite Materials with Various Drill Bits", Journal of Materials Processing
Technology, Vol. 140, pp.335-339.
(67) Hocheng, H. and Tsao, C.C., 2003, "Analysis of Delamination in Drilling Composite
Materials Using Core Drill", The Inaugural Issue of Australian Journal of Mechanical
Engineering, Vol.1, No.1, pp.49-53.
(68) Tsao, C.C. and Hocheng, H., 2003, "The Effect of Chisel Length and Associated Pilot
Hole on Delamination when Drilling Composite Materials", International Journal of
Machine Tools & Manufacture, Vol.43, No.11, pp.1087-1092
(69) Hocheng, H., Pan, C.T. and Cheng, C.C., 2003, “Formation of Micro-Lens by Reflow of
Dual Photoresist”, The Japanese Journal of Applied Physics, Vol.42, No.6B,
5
pp.4044-4047.
(70) Guu, Y.H., Hocheng, H., Chou, C.Y. and Deng, C.S., 2003,"Effect of Electrical Discharge
Machining on Surface Characteristics and Machining Damage of AISI D2 Tool
Steel", Journal of Material Science and Engineering, Vol A358, pp.37-43.
(71) Hocheng, H. and Pa, P.S., 2004, "Design of Arrow-Head Electrode in Electropolishing of
Cylindrical Part", International Journal of Materials and Product Technology, Vol.20,
No.4, pp.312-326.
(72) Taso, C. C. and Hocheng, H., 2004,"Taguchi Analysis of Delamination Associated with
Various Drill Bit in Drilling of Composite Material", International Journal of Machine
Tools & Manufacture, Vol. 44, No.10, pp.1085-1090.
(73) Hocheng, H. and Hsieh, M.L., 2004, "Signal Analysis of Surface Roughness in Diamond
Turning of Lens Molds", International Journal of Machine Tools & Manufacture, Vol.
44, No.15, pp. 1607-1618.
(74) Hocheng, H. Kao K.S. and Fang, W.L., 2004, “Fatigue Life of a Microcantilever
Beam in Bending”, Journal of Vacuum Science Technology B: Microelectronics and
Nanometer Structures, Vol. 22, No.6, pp.3143-3146.
(75) Hocheng, H. Kao K.S. and Fang, W.L., 2004, “Fatigue Life of a Microcantilever Beam in
Bending”, Virtual Journal of Nanoscale Science & Technology, Vol. 10, No. 26,
doi:10.1116/1.1821502.
(publication selected by this journal from JVST: 23 papers out of 148)
(76) Hocheng, H. and Huang, Y.L., 2004, “In-Situ Endpoint Detection by Pad Temperature in
Chemical Mechanical Polishing of Copper Overlay”, IEEE Trans. Semiconductor
Manufacturing, Vol. 17, No. 2, pp.180-187.
(77) Tsao, C.C. and Hocheng, H., 2005, "Effect of Eccentricity of Twist Drill and Candle Stick
Drill on Delamination in Drilling Composite Materials", International Journal of
Machine Tools & Manufacture, Vol.45, pp.125-130.
(78) Hocheng, H., P.S. Gao and Lin, S.C., 2005, "Generation of Erosion Profile of Through
Hole in Electrochemical Boring Using Stepwise Moving Electrode", International
Journal of Manufacturing Technology and Management, Vol.7, No.2-4, pp.268-286.
(79) Tsao, C.C. and Hocheng, H., 2005, “Computerized Tomography and C-Scan for
Measuring Delamination in Drilling of Composite Material Using Various Drills",
International Journal of Machine Tools & Manufacture, Vol.45, pp. 1282-1287.
(80) Hocheng, H., Gao, P.S. and Lin, S.C., 2005, "Development of the Eroded Opening
during Electrochemical Boring of Hole", International Journal of Advanced
Manufacturing Technology, Vol. 25, No. 11/12, pp. 1105 – 1112.
(81) Tsao, C.C. and Hocheng, H., 2005, “Effects of Exit Back-up on Delamination in Drilling
Composite Materials Using a Saw Drill and a Core Drill", International Journal of
Machine Tools & Manufacture, Vol.45, pp.1261-1270.
(82) Hocheng, H. and Chen, C.C., 2005, “A Study of the Chemical-Assisted Mechanical
6
Polishing of CVD Diamond Film", Special Issue of Materials Science Forum,
Vols.505-507, pp.1225-1230.
(83) Hocheng, H. and Tsao, C.C., 2005, “The Path Towards Delamination-Free Drilling of
Composite Materials", a review paper in Special Issue of Journal of Materials
Processing Technology celebrating the 70th birthday of Prof. Frank W. Travis, Vol.167,
pp.251-264.
(84) Hocheng, H., Lin, S.Y. and Lei, W.T., 2005, "Surface Finish in Machining of Dental
Ceramics", Materials Science Forum, Vols.505-507, pp.1231-1236.
(85) Chen, S.Y., Lin, S.C. and Hocheng, H, 2005, “Polishing Glass-ceramic Based Rigid
Disk”, Material Science Forum, Vols.505-507, pp.1213-1218.
(86) Lin, S. C., Huang, H.C. and Hocheng, H., 2005, “Effects of Slurry Components on the
Surface Characteristics when Chemical Mechanical Polishing NiP/Al Substrate”, Thin
Solid Film, Vol.483/1-2, pp.400-406.
(87) Pa, P.S. and Hocheng, H., 2005, "Using Borer-Shape Electrode in Electrochemical
Smoothing of Hole", Material Science Forum, Vols.505-507, pp.793-798.
(88) Hocheng, H. and Nien, C.C., 2006, "Numerical Analysis of Effects of Mold Feature and
Contact Friction on Cavity Filling in Nanoimprinting Process", Journal of
Microfabrication, Microlithography, and Micromachining, Vol.5, No.1,
pp.011004-1-7.
(89) Lin, Y.C., Hocheng, H., Fang, W.L. and Chen, R., 2006, "Fabrication and Fatigue
Testing of an Electrostatically Driven Microcantilever Beam", Materials and
Manufacturing Processes, Vol.21, No.1, pp.75-80.
(90) Hocheng, H. and Taso, C. C., 2006, “Effects of Special Drill Bits on Drilling-Induced
Delamination of Composite Materials”, International J. Machine Tools and
Manufacture, Vol.46, pp.1403-1416.
(91) Hocheng, H., and Nien, C.C., 2006, “In-situ Monitoring of Cavity Filling in Nanoimprint
by Capacitance”, The Japanese Journal of Applied Physics, Vol.45, No.6B,
pp.5590-5596.
(92) Hocheng, H. and Huang, Y.L., 2007, “In-situ Endpoint Monitoring by Acoustic
Emissions in Chemical Mechanical Polishing of Metal Overlay”, IEEE Trans.
Semiconductor Manufacturing, Vol. 20, No. 3, pp.306-312.
(93) Pa, P.S. and Hocheng, H., 2007, "Design of Rib Plate of Electrode in Electrochemical
Smoothing and Electrobrightening of Large Hole", International Journal of Advanced
Manufacturing Technology, Vol.34, No.5-6, pp.517-526.
(94) Hocheng, H. and Tsao, C. C., 2007, “Computerized Tomography and C-scan for
Measuring Drilling-Induced Delamination in Composite Material Using Twist Drill and
Core Drill”, accepted to the Key Engineering Materials, Vol.339, pp.16-20.
(95) Tsao, C.C. and Hocheng, H., 2007, “Parametric Study on Thrust Force of Core Drill",
Journal of Materials Processing Technology, Vol.192, pp.37-40.
(96) Tsao, C.C. and Hocheng, H., 2007, “Effect of Tool Wear on Delamination in Drilling
7
Composite Materials", International Journal of Mechanical Sciences, Vol. 49,
pp.983-988.
(97) Hocheng, H. and Nien, C.C., 2007, "A Review of Monitoring for Nanoimprinting",
Journal of Achievements in Materials and Manufacturing Engineering celebrating
the 60th birthday of Prof. Leszek A. Dobrzanski, Vol.24, No.1, pp.382-389.
(98) Hocheng, H., and Hsu, W.S., 2007, “Effects of Back Grooves on Improving Uniformity
in Nanoimprint Lithography”, The Japanese Journal of Applied Physics, Vol.46, 9B,
pp.6370-6372.
(99) Hocheng, H., and Wang, K.Y., 2007, “Analysis and Fabrication of Mini-feature Lamp
Lens by Excimer Laser Micromachining”, Applied Optics, Vol. 46, pp. 7184-7189.
(100) Hocheng, H and Pa, P.S., 2007, "A Review of Electrode Design for Electrochemical
Drilling and Electropolishing of Holes", Current Topics in Electrochemistry, Vol.12,
pp.33-49.
(101) Tsao, C. C. and Hocheng, H., 2008, “Evaluation of Thrust Force and Surface Roughness
in Drilling Composite Material Using Taguchi Analysis and Neural Network”, Journal
of Materials Processing Technology, Vol. 23, pp.342-348.
(102) Tsao, C. C. and Hocheng, H., 2008, “Analysis of Delamination in Drilling Composite
Materials by Core-Saw Drill”, International Journal of Materials and Product
Technology, pp.188-201.
(103) Tsao, C. C. and Hocheng, H., 2008, “Effect of Peripheral Drilling Moment on
Delamination Using Special Drill Bits”, Journal of Materials Processing Technology
Vol 201/1-3, pp. 471-476.
(104) Wen, T.T. and Hocheng, H., 2008, “Replication of Microlens Arrays by Gas-Assisted
Hot Embossing”, Materials and Manufacturing Processes, Vol. 23, pp.261-268.
(105) Hocheng, H. and Wang, K.Y., 2008, "Microgroove Pattern Machined by Excimer Laser
Dragging", International Journal of Manufacturing Technology and Management,
Vol.13, No.2/3/4, pp.241-253.
(106) Chang, J.H., Hocheng, H., Chang, H.Y. and Shih, A., 2008, “Metal Removal Rate of
Thiobacillus Thiooxidans without Pre-secreted Metabolite”, Journal of Materials
Processing Technology, Vol 201/1-3, pp. 560-564.
(107) Guu, Y.H., Hocheng, H. and Chang, C.H., 2008, “Study of Piezoelectrically Actuated
Micropumps with Multi Parallel Chambers”, Materials and Manufacturing Processes,
Vol. 23, pp.1-6.
(108) Hocheng, H., and Tseng, C., 2008, “Mechanical and Optical Design for Assembly of
Vascular Endothelial Cells Using Laser Guidance and Tweezers”, Optics
Communications, Vol. 281, pp. 4435-4441.
(109) Hocheng, H., Hung, J.N. and Guu, Y.H., 2008, "Various Fatigue Testing of Polysilicon
Microcantilever Beam in Bending", The Japanese Journal of Applied Physics, Vol.47,
pp.5256-5261.
8
(110) Hocheng, H. and Wen, T.T., 2008, “Electromagnetic Force-Assisted Imprint
Technology for Fabrication of Submicron-Structure”, Microelectronic Engineering,
Vol. 85, pp. 1652-1657.
(111) Hocheng, H. and Hsu, W.S., 2008, “An Innovative Method for Uniform Pattern Transfer
in Nanoimprint”, Journal of NanoScience and NanoTechnology. (accepted)
(B) CONFERENCE PAPER
(full-length refereed papers are listed / * Invited or Awarded Paper )
(1) Hocheng, H. and Dharan, C.K.H., 1988, "Modeling of Delamination during Drilling of
Composite Materials", Machining Composites, Proc.109th ASME Winter Annual
Meeting, Chicago, USA, pp.39-47.
(2) Hocheng, H. and Puw, H. Y., 1991, "Milling of Unidirectionally Carbon Fiber-Reinforced
Plastics", Processing and Manufacturing of Composite Materials, Proc. 112th ASME
Winter Annual Meeting, Atlanta, USA, pp.65-76.
(3) Hocheng, H., 1991, "An Approach to Quality Control for Drilling Processes", Proc. 12th
European SAMPE Conference, The Netherlands, pp.523-536.
(4) Hocheng, H., Hsu, C.C. and Yeh, T.S., 1992, "Cutting Alumina Substrate by Laser", in
Manufacturing Aspects in Electronic Packaging, Proc. 113th ASME Winter Annual
Meeting, Los Angeles, USA, pp.121-136.
*(5) Hocheng, H., Puw, H.Y. and Yao, K.C., 1992, "Experimental Aspects of Drilling of Some
Fiber Reinforced Plastics", Am. Soc. Materials International Conference, Symp. on
Machining of Composite Materials (I), Chicago, U.S.A.
(6) Yahiro, T., Hocheng, H., Shieh,.C. and Yen, F.S., 1992, Editor of Proceedings of The Third
Pacific Rim International Conference on Water Jet Technology, 436 pages, Taiwan, ROC.
(7) Hocheng, H. and Pan, C.T., 1993, "Section Area of Heat Affected Zone in Laser Cutting of
Carbon Fiber-Reinforced PEEK", in Machining of Advanced Composites, Proc. 114th
ASME Winter Annual Meeting, December, New Orlean, USA, pp.153-166.
(8) Hocheng, H. and Puw, H.Y., 1993, "Milling Force Prediction for Fiber-Reinforced
Thermoplastics", in Machining of Advanced Composites, Proc. 114th ASME Winter
Annual Meeting, December, USA, pp.73-88.
*(9) Hocheng, H. and Puw, H.Y., 1993, "Milling Force Prediction for Unidirectionally Fiber
Reinforced Plastics", Am. Soc. Materials International Conference, Symp. on Machining of
Composite Materials (II), Pittsburgh, U.S.A.
(10) Hocheng, H. and Pan, C.T., 1994, "Investigation of Laser Cutting of Composite Material at
Low Temperature", Proc. International Meeting on Composite Materials, May, Italy.
(11) Hocheng, H., Puw, H.Y. and Kuo, H.C., 1994, "Effects of Fiber Angle on Cutting Force of
Composites", Proc. 12th National Conference on Mechanical Engineering, Taiwan, ROC
(12) Pan, C.T. and Hocheng, H., 1995, "Laser Grooving of Anisotropic Material at Low
Temperature", Proc. XI Int'l Symp. for Electromachining, Swizerland, pp.743-756.
9
(13) Tsai, H.H. and Hocheng, H., 1995, "Monitoring of Spark-in in Surface Grinding", Proc. 2nd
Int'l Conf. on Precision Engineering, Singapore, pp.413-416.
(14) Puw, H.Y., Hocheng, H. and Kuo, H.C., 1995, "Anisotropic Chip Formation Models in
Cutting of Fiber-Reinforced Plastics", Proc. 115th Proc. ASME IMECE (WAM), San
Francisco, USA, pp. 259-282.
(15) Hocheng, H., Wang, S.H. and Tsai, H.H., 1995, "Grinding Force and Surface Roughness of
Al-SiC Metal Matrix Composites", 2nd Int'l Abrasive Technology Conf. Taiwan, ROC..
(16) Hocheng, H., Tsai, H.Y. and Shiue, C.C., 1995, "Feasibility Study of Abrasive Water Jet
Milling of FRP", Proc. ASME AMD/PD/MD Joint Meeting, Symp. Machining of Advanced
Materials, June, Los Angeles, USA, pp. 93-114,
*(17) Hocheng, H. Chao, Y.C. and Puw, H.Y., 1995, "A General Model for Thrust Force-Induced
Delamination in Drilling of Composite Laminates", Proc. ASME AMD/PD/MD Joint
Meeting, Symp. on Machining of Advanced Materials, Los Angeles, USA, pp.29-40.
(18) Hocheng, H., Kao, M.C. and Cheng, P.R., 1996, "A Preliminary Study of Sheet Metal
Bending by Laser", Proc. 13th National Conference on Mechanical Engineering, Taiwan,
ROC, pp.532-539.
(19) Puw, H.Y. and Hocheng, H., 1996 "Anisotropic Model of Milling Force Prediction for
Fiber Reinforced Plastics", Proc. 3rd ASME Engineering System Design and Analysis
Conference, Montpellier, France, pp.11-20.
(20) Hocheng, H., Tsai, H.Y. and Chen, L.J., 1997, "A Kinematic Analysis of CMP Based on
Velocity Model", Proc. 2nd Int'l VMIC-CMP Conf., San Francisco, USA, pp.277-280.
(21) Hocheng, H. and Pa, P.S., 1997, "Electrobrightening and Electropolishing of Holes Using
Different Completely Inserted Electrodes", Proc. JSME Centennial Grand Conf., Tokyo,
Japan, pp.281-286.
(22) Hocheng, H. and Wei, S.W., 1998, "Electropolishing of Steels Using Electrode Stroke", 3rd
Int'l Conf. Progress on Cutting and Grinding, PROC.
(23) Spur, G., Hocheng, H., Liebelt, S. and Pan, C.T., 1998 "Prediction of Extent of Heat
Affected Zone in Laser Processing of Anisotropic Fiber-Reinforced Plastics", Proc. 4th
ASME Engineering System Design and Analysis Conference, Berlin, Germany, pp.11-20.
(24) Tai, N.H., Lee, K.P., Hocheng, H. and Liu, C.S., 1998, "Processing and Characterization
of Carbon Fiber Reinforced Ceramic Nanocomposites", 2nd Int'l Symp. on Science of
Engineering Ceramics in Key Engineering Materials, Ceramic Soc. Japan, Osaka, Vol.3,
pp.352-366.
(25) Hocheng, H. and Tsai, H.Y., 1998, "An Analytical Aspect of the Preston Equation", 116th
Proc. ASME IMECE (WAM), MED-Vol. 8, Anaheim, USA, pp.33-36.
(26) Hocheng, H. and Chao, Y.C., 1998, "Improvement of Cut Width of Metal Tube by
Submerged Abrasive Waterjet Cutting", Proc. 5th Pacific Rim Int'l Conf. on Water Jet
Technology, New Delhi, India, pp.352-366.
(27) Hocheng, H., Tsai, H.Y., Lai, K. C., Lin, H. Y. and Wu, T. C., 1999, "A Kinematic Analysis
10
of Planetary Train in Chemical Mechanical Planarization", Proc. 1st Int'l Conf. of European
Soc. Precision Engineering & Nanotechnology, Bremen, Germany, pp.384-387.
(28) Kuo, K.L., Hocheng, H. and Chiu, C.H., 1999, "Feasibility Study of Self-Following
Ultrasonic Polishing of Mold Steel", A014, Proc. 5th Int. Conf. on Manufacturing
Technology, Beijing.
(29) Hocheng, H. and Kuo, K.L., 1999, "Preliminary Study of Ultrasonic Polishing of Mold
Steel", Proc. 16th National Conference on Mechanical Engineering, Taiwan, ROC, pp.211-
218.
(30) Pan, C.T. and Hocheng, H., 2000, "Anisotropic Thermal Conductivity in Predicting Heat
Affected Zone from Laser Machining of Unidirectional FRP", Proc. 5th ASME
Engineering System Design and Analysis Conference, Montreux, Switzerland, pp.27-34.
(31) Hocheng, H. and Kuo, K.L., 2000, "Equipment of Ultrasonic Polishing of Mold Steel",
Proc. 17th National Conference on Mechanical Engineering, Taiwan, ROC, pp.81-88.
(32) Chang, Y., Hsu, H.W. and Hocheng, H., 2000, "Indices for Molding Sand in Casting –
Evaluation of Compaction Ratio and Relationship with Porosity”, Proc. Annual Meeting of
Society of Materials Science, Taiwan, ROC.
(33) Hocheng, H. and Cheng, C.Y., 2001, "Feasibility of Abrasive Waterjet for Decommission of
Nuclear Power Plant", Proc. 2nd Cross-Strait Workshop on Manufacturing Technology,
Dalian, PRC.
(34) Chang, Y. and Hocheng, H. and Shyu, S.W., 2001, "Relationship between Compactability
and Porosity of Green Molding Sand", Proc. 7th Asian Foundry Congress, Taipei,
pp.545-554.
(35) Chang, Y. and Hocheng, H. and Shyu, S.W., 2001, "Using Permeability to Inspect the Inner
Structure of Green Molding Sand", Proc. 7th Asian Foundry Congress, Taipei, pp.565-574.
(36) Hocheng, H. and Tsao, C.C., 2001, " Delamination Models in Drilling of Composite
Materials Using Saw Drill and Candle-Stick Drill", 119th ASME Itenational Conference
and Exhibition of Mechanical Engineering, Vol.12, pp.73-77.
(37) Hocheng, H., Puw, H.Y. and Tsao, C.C., 2001, "Analysis of Delamination in Drilling
Composite Materials Using Step Drill", Proc. 18th National Conference on Mechanical
Engineering, Taiwan, ROC, Vol.4, pp.895-900.
(38) Hocheng, H.and Huang, Y.L., 2001, "Preliminary Study of Endpoint detection for Chemical
Mechanical Planarization Using Acoustic Emission", Proc. 8th International VMIC
Conference, pp.107-110.
(39) Hocheng, H. and Tsao, C.C., 2002, "Generalized Analysis of Delamination in Drilling
Composite Materials Using Core Drill and Twist Drill ", Proc. 3rd Australian Congress on
Applied Mechanics, pp. 285-290.
(40) Hocheng, H., Gao, P.S. and Lin, S.C., 2002, "Prediction of the Eroded Profile during
Electrochemical Machining of Hole", Proc. ASME/JSME Joint International Conference
on Materials and Processing, Honululu, USA, pp.303-308.
11
(41) Hocheng, H. and Taso, C. C., 2002, “Computerized Tomography for Evaluation of
Drilling-Induced Delamination of Composite Materials by Various Drill”, ASME 6th
Biennial Conference on Engineering System Design and Analysis, Turkey, MAN-046.
(42) Hocheng, H. and Tsao, C.C., 2004, “Analysis of Delamination in Drilling Composite
Materials Using Core Center Drill”, Proc. 11th Int. Conference on Composites Engineering,
S. Carolina, USA.
(43) Hocheng, H. and Huang, Y.L., 2004, “Endpoint Monitoring in Chemical Mechanical
Polishing of Copper Overlay by Acoustic Emissions for Deep-Submicron Integrated
Circuits Manufacturing”, Proc. Japan-US Conference on Flexible Automation, Denver,
USA.
(44) Nien, C. C., Hocheng, H. and Kao, K. S., 2004, “Numerical Analysis for Stress and Strain
Distributions of Imprint Mold During Nanoimprinting Process”, Proc. 3rd Int Conf on
Nanoimprint and Nanoprint Technology, Vienna, Austria.
(45) Hocheng, H. and Tsao, C.C., 2004, “Analysis of Delamination in Drilling Composite
Materials Using Core-Saw Drill”, Proc. 7th Int. Conference on Progress of Machining
Technology, Suzhou, China.
(46) Guu, Y.H. and Hocheng, H., 2005, “Simulation of Micro Flow Control Valve with
Piezoelectric Actuator", Proc. 4th Asia-Pacific Form on Precision Surface Finishing and
Deburring Technology, Taiwan, pp. 191-196.
* (47) Tsao, C.C. and Hocheng, H., 2005, “Modeling of Critical Thrust Force and the Effects of
Size Ratio between Stages of Step Drill in Drilling Composite Materials”, Proc. 12th Int.
Conference on Composites Engineering, Tenerife, Spain.
(48) Hocheng, H. and, Tsao, C. C., 2005, “Computerized Tomography and C-scan for
Measuring Drilling-Induced Delamination in Composite Material Using Twist Drill and
Core Drill”, Proc. The International Conference on Precision Engineering and Micro/Nano
Technology in Asia, Shenzhen, China.
* (49) Hocheng, H. and Hsu, W.H., 2006, “Improving Uniformity in Nanoimprint Lithography
by Designed Local Deformation of Mold”, Proc. 7th International Conference on
Frontiers of Design and Manufacturing, Guangzhou, China. (Best Paper Award)
(50) Hocheng, H. and Tseng, C., 2006, “A Laser Guiding and Tweezers Platform for
Cardiovascular Endothelia Assembly”, Proc. 5th World Congress of Biomechanics, Munich,
Germany.
(51) Tseng, C., Hocheng, H. and Fan, L.S., 2007, “Platform Design for the Capillary Assembly
by Optical Tweezers”, Proc. International Conference on Competitive Manufacturing,
Stellenbosch, South Africa, pp.131-136.
* (52) Hocheng, H., Hsu, W.S. and Nien, C.C., 2007, Distinguished Lecture, “Advancing
Nanoimprint by End Point Monitoring and Uniform Contact”, Int. Conference on
Composite Engineering and Nanomaterials, Hainan, China.
* (53) Hocheng, H. and Wang, K.Y., 2007, “Miniaturization of Lens Feature and Macroscopic
12
Performance Modification”, Cross-Strait Conference on Manufacturing Technology, Xian,
China.
(54) Chang, J.H., Hocheng, H., Chang, H.Y. and Shih, A., 2007, “Metal Removal Rate of
Thiobacillus Thiooxidans without Pre-secreted Metabolite”, Proc. 10th International
Conference on Advances in Materials and Processing Technologies, Taejeon, Korea.
* (55) Hocheng, H., and Hung, J.N., 2007, "Various Fatigue Testing of Polysilicon Microcantilever
Beam in Bending", International Microprocesses and Nanotechnology Conference, Kyoto,
Japan.
(56) Hocheng, H., and Nien, C.C., 2007, "A Review of Monitoring for Nanoimprinting", World
Congress on Materials and Manufacturing Engineering and Technology, Poland.
* (57) Hocheng, H.and Hsu, W.S., 2008, “Innovative Approach to Uniform Nanoimprint”,
International Meeting on Materials, Processes and Applications of Nanotechnology,
Cambridge, UK.
(58) Hocheng, H., and Wen, T.T., 2008, “Innovative Approach to Uniform Imprint of Micron and
Submicron Features”, World Congress on Materials and Manufacturing Engineering and
Technology, Poland.
(59) Hocheng, H., Wang, J.C., Chang J.H. and Shen W.C., 2008, “Laser-Assisted Copper
Deposition by Bacteria Means”, 34th International Conference on Micro and Nano
Engineering, Greece.
(60) Hocheng, H., Hsu, W.S. and Nien, C.C., 2008, “Advancing Nanoimprint by End Point
Monitoring and Uniform Contact”, Cross-Strait Conference on Manufacturing Technology,
Hong Kong.
(61) Hung, J.N., and Hocheng, H., 2008, "Resonance Frequency of Polysilicon Microcantilever
Beam of Various Dimensions and Root Geometry ", International Workshop on
Nanomechanical Cantilever Sensors, Germany.
(C) TECHNICAL REPORT
(1) Hocheng, H., 1986, "Ermittlung der Gelenkkraefte und Gelenkmomente in Raeumlichen
getrieben unter Beruecksichtigung von Massentraegheit und aeusseren Kraeften und
Momenten", Institut fuer Getriebetechnik und Maschinendynamik, RWTH Aachen,
Germany, 96pages. (in German)
(2) Hocheng, H., 1986, "Entwicklung einer Systematischen Vorgehensweise zur Beurteilung
des Thermischen Verhaltens von Werkzeugmaschinen mit Hilfe der Thermographie", WZL,
RWTH Aachen, Germany, 40pages. (in German)
(3) Hocheng, H., 1986, "Ermitllung Erweiterter Rechenansaetze zur Bestimmung des
Dynamikfaktors Kv fuer Zylinderradgetriebe nach DIN3990", WZL, RWTH Aachen,
Germany, 38pages. (in German)
(4) Hocheng, H. and Jeng, G.S., 1991, "Computer-Aided System for Water Jet Cutting of
Composite Materials (I) and (II)", NSC79-0422-E007-03/NSC80-0401-E007-21, Taiwan,
13
ROC.
(5) Hocheng, H. and Jeng, G.S., 1991, "Integrated CAD/CAM Water Jet Cutting System",
Flow Asia Co., Taiwan, ROC.
(6) Hocheng, H. and Puw, H.Y., 1991, "Delamination of Composote Materials in Drilling",
NSC80-0401-E007-17, Taiwan, ROC.
(7) Hocheng, H. and Yao, K.C., 1992, "Delamination and Tool Wear in Drilling of Composite
Tube", NSC81-0401-E007-10, Taiwan, ROC.
(8) Hocheng, H. and Hsu, C.C., 1992, "Kerf Quality in Laser Cutting of Ceramic Materials",
NSC81-0401-E007-12, Taiwan. ROC.
(9) Hocheng, H. and Chang, K.R., 1992, "A Study of Abrasive Water Jet Cutting of
Engineering Ceramics", Flow Asia Co., Taiwan, ROC.
(10)Hocheng, H., Ma, C.C., Kuo, H.C. and Yao, K.C., 1992, "Design of Drilling and
Environmental Test of Aerospace Composite Materials (I)", CS80-0210-D-007-22, Taiwan,
ROC.
(11)Hocheng, H., Lin, S.C. and Puw, H.Y., 1992, "Fundament Study of Milling of Composite
Materials", NSC81-0422-E-007-04, Taiwan, ROC.
(12)Hocheng, H., Ma, .C., Wu, C.F. and Huang, Y.C., 1993, "Design of Drilling and
Environmental Test of Aerospace Composite Materials (II)", CS82-0210-D-007-16,
Taiwan, ROC.
(13)Hocheng, H., and Leu, S.C. 1993, "Study of Turning of Carbon Fiber-Reinforced
Composite Materials", NSC82-0401-E-007-118, Taiwan, ROC.
(14)Hocheng, H. and Hsu, C.C. 1994, "In


Use: 0.1236